The White Wall Factor








Factors For House Painters Sydney

There’s no one factor to make a room look good, unless you consider coherence a factor. Really, coherence is how all the factors fit together. But there are more way to fit things together than the human mind can ever imagine. The point is there’s many way to decorate a room. Sometimes the room determines what can be done with it. Sometimes we can turn a particular room into what we want it to be. There’s no rule except that the end result mast all fit together.


There is a general rumour that white rooms will always look bigger. Like many rumours this has a partial truth to it. A naturally lit room looks good with very light colours.  But a dark room, own without windows or in the shade, does not benefit from white walls; there is no light to bounce around.  When you paint a dim room white it just looks sterile.


If you walls are heavy, the windows small or if the outside wall faces away from the Sun your room will probably not suit white.  If you have to turn the electric lights on during the day then the room needs something other than white.  A neutral colour is probably a better option. Unless you want a very small feeling room avoid the really dark tones.


Painters Sydney

It you want to know which neutral colour to choose when painting the walls you are going to have to start looking at all the other factors in the room. If you already have the furniture, or at least if you have already chosen the furniture, the colour of the walls with have to be selected to complement this décor. Look at the overall effect, and be wary of any advice that pretends to be true under all circumstances.


Window Tinting Perth

Normal glass does block some UV radiation, but not all of it. Without a Protective film or coating clear glass will block most UVB rays that cause sunburn, but not all UVA rays that cause other forms of damage. Plain glass reduces UV rays and their damage, but does not eliminate them.


Any glass window can be fitted with protective film that eliminates more than 99% of UV rays. These UV protective films last for years, protecting both the people and furnishings inside from damage.


House Window Tinting Perth

Furniture and carpets will suffer fading if not protected from UV light. Affixing UV film to the windows all but eliminates this.


Car Window Tinting Perth

One of the few issue to watch for with tinted windows is correct washing. Tinted windows can take far longer to dry that plain glass. With any type of glass cleaning there is always problems streaks forming, but film treated windows also have potential issues with water getting between the film and the glass. This trapped water can result in a hazy and blistered window. Proper window cleaning techniques can prevent this.



Many glass cleaning products contain ammonia. This quickly damages rubber, leather, vinyl and some other car surfaces, so should be avoided. Ammonia is also harmful to tinting film, so is completely unsuitable for cars with tinted windows.

Ammonia is harmful to people, and should only be used in well ventilated areas.


Microfiber Towels.

It is easy to achieve great results by use a wet microfiber towel to clean a window. Wet part of the towel for cleaning the glass surface, then immediately use the dry part of the towel for drying.


Car Detailing Perth,

Car detailing will look after windscreen wipers, which need to be clean lest they cause visibility problems with the glass. It will also look after that area that door windows retract into, lest this cause problems.

Interior Real Estate Photo Editing Services






Real estate Photo Editing

  • Take multiple digital photos and pick the best shots. Standard practice these days.
  • Make sure photos are straight. People’s eyes will notice the vertical rather than the horizontal; make vertical lines look truly vertical.
  • If the angle of the photo causes the vertical and horizontal to meet at anything other than right angles, consider changing this (see below).
  • Try to use natural light to get an image that does not need re-touching or as little retouching as possible.
  • Artificial lighting can make a room photo look yellow. This gives an old fashioned feel to a house, which is usually not what is wanted. Colour correct this.
  • Consider one-point perspective – where all the lines in a picture point to the centre. Standing at one end of a room so that the opposite wall is in the centre will create this effect. The lines where the ceiling joins the walls, and the lines where the wall join the floor, will all point towards the centre of the far wall.
  • With a smaller room it can help to stand in one corner and shoot into the opposing corner. This can make the room look bigger.
  • If using a flash, be mindful of reflections.


Real Estate Photo Retouching Services

  • Slanted Photos can be corrected in many ways, including Photoshop ruler tool.
  • Skew, where the vertical and horizontal meet at something other than right angles, can be corrected with skew. But if the eye is aware of the angel of the shot it sometime compensates for this. As always, as long as the image looks natural it is acceptable.
  • Lighten images in whatever way looks like natural daylight.
  • Dim images look poor, bad contrast looks poor. Slightly overbright and slightly increased contrast won’t cause problems.
  • Reduce flare, bright spots and reflections.
  • If the images look great, you can ignore any rule that suggests otherwise.


Consider real estate photo editing. If the real estate photo retouching brings in one more bidder or one more offer for a home, the effort is well worthwhile.

Bamboo Flooring Perth

Bamboo has only been used as flooring in the recent past, quickly becoming popular because of its appearance, durability and environmental potential.  But as with all new products there has been some trial and error involved, with some developments working better than others. It helps to know what to look for.


Bamboo looks and feels a lot like wood, even as it is a grass. Its great advantage is that it can grow to a useable product in just a few years. Quality hardwood takes 30 to 60 years before it is useable as timber. This, along with the ability to grow in areas not likely to interfere with wildlife, makes it an environmentally sound option.


But good quality bamboo needs at least 6 years to obtain its full strength. At this full strength it is comparable to hardwood. Any bamboo harvested after only 3 years is soft, and prone to damage. Insist on bamboo of the proper age, at least for flooring.


Bamboo flooring can be divided into three types:

  • Vertical Grain – Strips of bamboo stacked on edge and bonded together.
  • Flat Grain – Horizontal strips of bamboo laminated together
  • Strand bamboo – Consists of fibres bonded together.


Like many housing products Bamboo may be made with formaldehyde. Check with the manufacturer; it may be necessary to air the rooms for several days.


Timber Floors Perth

Flooring is a long term investment, and something you want to get right. For engineered, bamboo, solid or any other timber flooring Perth based Knock Out Flooring are highly recommended.


Laminate flooring Perth

Those who do not want a wooden finish there is also laminate flooring, made to resemble any stone, tiles or artificial surface.


Pipelines are an economical means of transporting liquids, gasses and some solids. Their initial installation, at least for long distances, tends to be expensive, but after setting up they are extremely cheap to use and maintain. This low maintenance cost is a further advantage in remote areas, or anywhere that access would be difficult or costly. Pipelines work steadily in the background with minimal environmental impact.

Pipe Cladding Materials

The one serious disadvantage of piping, their installation expense, has been largely reduced by modern materials and engineering innovations. Prefabricated piping can be produced at a lower cost than any custom made system, and has the advantages that it is designed to fit together and can be modified with minimal effort. Additionally, the individual fitting pieces of the system do not require welding, riveting, soldering or any other skilled form of joining; interlocking pieces are joined with steel bands. These steel band joins include straight piping sections, pipe cladding elbows, pipe cladding tees and all other pipe cladding materials.

These engineering advantages mean that piping is not only easier but also quicker to install, saving both time and labour costs.


There are different advantages to different forms of hydronic heating. Different customers and situations may be better served with different choices.

Hydronic UnderFloor Heating

The concept is simple- Hot water is piped through the floor to heat the room. The result is efficient and successful; rooms can be kept at a pleasant temperature with lower heating costs than almost any other heating method.

The downside is that this system really should be installed while building the house. It is quite expensive to try and renovate an existing house in order to install water pipes through the concrete.

Electronic UnderFloor Heating

This has many of the advantages of floor heating – efficient heat with no drafts. It also has the advantage that is it easier to install, especially in a completed building.

A variation on this is the use of electronically heated mats. These are non-permanent and are more cost efficient than stand-alone heaters.

Wood Fired Boiler Hydronic Heating

The water in underfloor hydronics has to be heated before use. Using a wood fire to heat water is an old but popular method. The burning wood heater can be discreetly installed in a garage or basement, quietly supplying heated water; or more modern installations use a home fireplace that heats directly the room while also heating water for hydronic use. These home fireplaces have a pleasant nostalgic look.

Solar Hydronic Heating,

Solar power has been a popular option for water heating over the past generation. Using it for hydronic heating seems like the next logical step. Large quantities of water can be heated by the Sun, and used over the following days to heat the house.

Hydronic Boilers.

Most house boilers are a wet back boiler. These expose more water to the boiler, and prove more economical.

Pellet boilers are used for larger applications. There are very suitable for loads of 3.9Kwatts or more, and work efficiently near full capacity. They are usually too large for an average home and waste energy if working at lower capacity.


What is interior decorating?

There are many factors in what makes the interior rooms of a house look the way they do. The architectural design is fairly set, unless one wants to renovate; even then the choices have their limitations. Interior designers are concerned with everything that can be changed while keeping the walls where they are. Interior designers are concerned with decorating what has already been built.

Interior designers are concerned with aesthetics and usually have degree or diploma level qualifications to this effect. Some less qualified individuals perform the same role but are called interior stylists. They may be quite capable and talented, but without the formal certification. Really, the terminology here is loose. The point is to find someone who brings you to the vision you want for the rooms to be decorated. If safety and utility are not really a factor for a particular room there is no need to insist on formal training. On the other hand a design might require factors that do affect function and safety, in which case you should insist on high level certification.

If you aim to employ an interior decorator then:

  • Look for work you like, and the professionals who made this happen. It’s a matter of taste that matches yours. Sometime this is a new innovative decorator, sometimes an old hand.
  • Find decorators who share you vision. Someone easy to communicate with is a huge factor here.
  • Get quotes for what you want, itemized and comprehensive. Try at least three designers.
  • Look for credentials where they do matter. Insurance is essential. Membership of the Design Institute of Australia shows that the person in question is up-to-date with the latest relavent developments.

Offices and business spaces require a different approach to home decorations. Any cooperate space is an indication of the function of the company, and perceived by potential clients as a reflection of the business’s performance. The look of a company and its offices are a form of advertising, and should be approach as such. The company head often has a good idea of the clientele, but the interior designer may be needed to find ascertain what appeals to this demographic.

Contact Luna Deco in Perth for Interior design advice, supplies and roller blinds.


Types of wooden flooring

Solid Wooden Flooring
These consist of a single solid layer of wood, usually between ¾ and 5/16 inches thick. Many generations ago it was the only option for wooden flooring; many of these wooden floors installed generations ago are still in service. These floors can be sanded and refurbished many times as the wood is of consistent quality and appearance.

The woods used for solid flooring have to be properly dried and prepared, otherwise expansion and contraction will cause warping in the floor.

Engineered Wood Floors
Modern techniques use multiple layers of wood, joined as a veneer. The various layers can be of different wood, with some types of woods on the surface for appearance and others used internally for strength. Additional strength is provided by running the various grains of the different layers in different directions, a technique that also improves stability and virtually eliminated warping. These wooden floors are hardly affected by general temperature and humidity variation.

Engineered floors can only be sanded back a few times before the top layer is removed. None the less they can last several decades under normal conditions.

Wooden floors, unless they are to be covered with carpet or some other surface, need to be finished. Flooring was once always installed in an unfinished state, and then sanded and finished once it had been put in place. This allowed the floor to be completely levelled by the sanding process and a choice of finishes to be applied. Installation took some time, and the sanding and finishing processes meant a delay before the floor could be walked upon.

Now it is common to buy factory finished flooring. This type of wooden flooring is quick and easy to install, and can be walked on as soon as it is put in place. Because of the highly uniform thickness of the unfinished wood the floor can be as level as the surface underneath it.

Floating Floor
A modern technique floating floors consist of a layer of laminated timber and insulating foam layer installed directly over a concrete slab. They have excellent sound insulation qualities and have no real issues with acclimatization or stability.

Laminate flooring
This is a very modern innovation. Laminate consists of a strong wooden or fibreboard material with a decorative paper pattern and a very hard resin surface. This allows a stable material, a hard wearing top surface, and because the pattern is printed on paper almost any appearance can be replicated, including non-wooden surfaces like tiles and stone. Laminate is relatively inexpensive, easy to install and ideal for floating floors. As long as it is kept reasonably dry it is quite stable.

Parquetry floors
Use a mosaic style pattern of wooden tiles to create an elaborately decorated floor. This usually requires some careful preplanning, but Parquetry floors can also be bought in preassembled sections.

Bamboo Flooring
This is a more recent alternative to hardwood. Like hardwood it consists of solid planks of a single material. In its natural state some bamboo is moderately soft, though this can be rectified with processing. Unfortunately some processes have the opposite effect, and poorly prepared and lower quality bamboo is prone to scratching. However, higher quality products that are properly prepared are comparable to better hardwood.

There is no standard grading system for Bamboo, so it is hard to separate the high quality from the low. For any concerns ask about bamboo flooring at Hanna timber in Sydney.

For any timber or laminate flooring needs in Sydney talk to Hana timber.